The Union Universal Disk V2 is a mounting disk sized between the Mini Disk and the Camber Disk. It works with all standard snowboard mounting patterns.

What it's for

The disk bolts the binding baseplate to the inserts in your board. Disk size changes how much of the board is clamped: a small disk leaves more flex, a large one adds response. The Universal Disk V2 sits in the middle, and it is the disk to use when you need one part that covers every common insert pattern.

Features

• Construction: thermoplastic
• Profile: between Union's Mini Disk and Camber Disk

Compatibility

• Fits: Flite Pro, Rosa, Cadet XS, and Cadet One, 2020 to present
• Mounting patterns: 2x4, 4x4, The Channel, and 3D
• How to check yours: 4x4 and 2x4 boards have two rows of threaded inserts per foot, The Channel is a single slot, and 3D is a three hole triangle pattern

Setup and installation

• Install: set your stance angle on the disk, then tighten the mounting screws evenly
• Cleaning: Union says not to use thread locker or chemicals to clean its disks and hardware
• Service: OMG's shop can mount bindings and set stance

In the box

• Universal Disk V2: 2
• Mounting hardware
• Mesh carrying bag